Malaysian Journal of Microscopy

Current Issue

Vol 21 No 1 (2025): Malaysian Journal of Microscopy

Published: 2025-06-02

Original Research Article

EFFECT OF PEG AND PVA BINDERS ON THE CNC MILLING OF HYDROXYAPATITE FOR BIOMEDICAL APPLICATIONS

Noor Hakim Rafai, Muhammad Hazim Ramli, Hasan Zuhudi Abdullah, Maizlinda Izwana Idris

1-9
- Paper 1
MORPHOLOGICAL AND MECHANICAL CHARACTERISTICS OF DENSE POROUS CERAMICS USING CARBON BLACK AND POLYMETHYL METHACRYLATE AS PORE-FORMING AGENTS AT VARYING CONCENTRATIONS

Mohamed Lokman Jalaluddin, Umar Al-Amani Azlan, Mohd Warikh Abd Rashid

10-22
- Paper 2
MICROSTRUCTURAL CHARACTERIZATION AND WEAR PROPERTIES OF STEEL SURFACE COMPOSITE COATING WITH TiC NANOPARTICLES THROUGH GTAW ARCING TECHNIQUES

Alin Qistina Shamsuri, Lailatul Harina Paijan, Zulkifli Mohd Rosli, Mohd Hadzley Abu Bakar, Mohd Fauzi Mamat, Ahmad Shihan Shaharuddin

23-33
- Paper 3
FABRICATION OF UNIFORM POROUS LAMELLAR ZINC STRUCTURES BY DEALLOYING OF EUTECTIC BINARY ZINC-ALUMINIUM ALLOYS

Muhammad Afiq Irfan Mohd Shumiri, Abdillah Sani Mohd Najib, Nor Akmal Fadil

34-46
- Paper 4
TOXICITY TESTING OF SELECTIVE LASER MELTING TECHNOLOGY TOWARDS PRODUCTION OF TITANIUM ALLOYS (Ti6Al4V) ORTHOPAEDIC METAL IMPLANT: PRIMARY ANALYSIS

Nurul Hafiza Mohd Jan, Ahmad Hafiz Zulkifly, Mohd Zulfadzli Ibrahim, Muhammad Ezham Zainal Abdullah, Sarah Haryati Mohd Zohari, Che Nor Zarida Che Seman, Mohd Afian Omar

47-57
- Paper 5
ENHANCED SUPERCAPACITOR PERFORMANCE WITH NICKEL OXIDE AND ACTIVATED CARBON COMPOSITES IN WATER-IN-SALT ELECTROLYTE (WISE)

Jaclyn Ingu Jublee, Yan Yan Farm , Mariani Rajin, Mohd Azlan Ismail, Sitty Nur Syafa Bakri, Mohamad Zul Hilmey Makmud, Chunyu Zhu

58-66
- Paper 6
EFFECT OF TEOS CONCENTRATION ON SILICA COATING MORPHOLOGY AND THERMAL STABILITY OF ELAEIS GUINEENSIS FIBER FOR FIRE RETARDANT APPLICATIONS

Norain Idris, Hasan Zuhudi Abdullah, Noraiham Mohamad, Zulkifli Mohd Rosli, Muhammad Zulfattah Zakaria

67-78
- Paper 7
DISTRIBUTION OF IRON SAND BASED ON SUSCEPTIBILITY VALUES IN ULAKAN TAPAKIS, PADANG PARIAMAN, WEST SUMATRA

Adree Octova, Mohd Hazizan Mohd Hashim, Rika Ampuh Hadiguna, Muhammad Irman Khalif Ahmad Aminuddin, Yoszi Mingsi Anaperta, Lulu Dwi Oktari

79-90
- Paper 8
EPOXY COMPOSITES REINFORCED WITH FISH-DERIVED HYDROXYAPATITE FOR LOAD-BEARING BIOMEDICAL APPLICATIONS

Ismail Zainol, Alhussein Arkan Majhooll, Che Nor Aiza Jaafar, Mustafa Mudhafar

91-101
- Paper 9
GROWTH MECHANISM OF DIAMOND-LIKE CARBON FLAKES REINFORCED OXIDE COATING ON AA2017 ALUMINIUM ALLOY

Nur Adilah Mohd Rawian, Shahira Liza, Noor Ayuma Mat Tahir, Kanao Fukuda, Yazid Yaakob, Hiroki Akasaka

102-113
- Paper 10
The COMPARISON ON STRUCTURAL, MORPHOLOGICAL AND ELECTRICAL ANALYSIS ON Mn AND Zn-DOPED KNN THIN FILM BY SOL-GEL METHOD

Muhd Afiq Hafizuddin Azman, Hidayah Mohd Ali Piah, Mohd Warikh Abd Rashid, Umar Al-Amani Haji Azlan, Maziati Akmal Mat Harttar@Mohd Hatta, Toshihiro Moriga

114-123
- Paper 11
EFFECT OF APPLIED VOLTAGE AND EPOXY SUSPENSION’S AGEING TIME ON SHEET RESISTANCE OF ELECTRODEPOSITED EPOXY COATINGS

Nurhaliana Shazwani Halim, Nik Ahmad Luqmanul Hakim Nik Ab Rashid, Kok-Tee Lau, Umar Al-Amani Azlan

124-134
- Paper 12
EFFECT OF CONTROLLED TEMPERATURE ON SURFACE PROPERTIES OF ANODIC ALUMINUM OXIDE COMPOSITE COATING

Hasnol Hadi Zakaria, Shahira Liza, Kanao Fukuda, Noor Ayuma Mat Tahir, Yazid Yaakob

135-146
- Paper 13
PINEAPPLE LEAF FIBRE/POLY (3-HYDROXYBUTYRATE-CO-3-HYDROXY VALERATE) DEGRADABLE COMPOSITE: MORPHOLOGY AND FAILURE PREDICTION OF MECHANICAL STRENGTH USING WEIBULL ANALYSIS

Zaleha Mustafa, Ain Sappa Amirah, Siti Hajar Sheikh Md Fadzullah, Siang Yee Chang, Nadlene Razali, Lin Feng Ng, Thanate Ratanawilai

147-158
- Paper 14
CHARACTERIZATION OF MICROPOROUS ACTIVATED CARBON FROM COCONUT SHELLS BIOCHAR USING SODIUM CHLORIDE AS CHEMICAL ACTIVATION AGENT

Che Nor Aiza Jaafar, Charles Christopher Sorrell, Ismail Zainol, Lai Jee Inn, Ahmad Ilyas Rushdan

159-169
- Paper 15
THE PREPARATION AND CHARACTERIZATION OF NANOCELLULOSE FROM BAMBOO FIBERS

Muhammad Akmal Kosnan, Rose Farahiyan Munawar, Muhamad Amer Kamli, Mohd Asyadi Azam, Intan Sharhida Othman, Jeefferie Abd Razak, Nur Ezyanie Safie

170-182
- Paper 16
GALLIC ACID IN COMBINATION WITH CISPLATIN TRIGGERED APOPTOSIS IN MCF-7 BREAST CANCER CELLS

Norlida Mamat, Nur Najihah Mahyun, Norhazilah Muhamad, Hermizi Hapidin, Hasmah Abdullah

183-193
- Paper 17
SYNTHESIS AND CHARACTERISATION OF PHOSPHORUS-DOPED AKERMANITE-BASED BIOCERAMICS

Fitria Pebriani Naibaho, Yanny Marliana Baba Ismail

194-202
- Paper 18
FUNGAL DERIVED CHITOSAN/ CELLULOSE NANOCRYSTALLINE BIOCOMPOSITES: ENHANCING WATER RESISTANCE AND MECHANICAL PROPERTIES

Kuan Eng Hoe, Sam Sung Ting, Noorulnajwa Diyana Yaacob, Madah Hussain, Wan Muhammad Aliif

203-213
- Paper 19
COMPARATIVE LEAF MICROMORPHOLOGY AND PALYNOLOGY OF SELECTED Ruellia L. AND Justicia L. SPECIES FROM ACANTHACEAE FAMILY AND ITS TAXONOMIC SIGNIFICANCES

Che Nurul Aini Che Amri, Noraini Talip, Rozilawati Shahari, Noor-Syaheera Mohd Yunus, Mohd Razik Midin, Mohd Fauzihan Karim, Nordahlia Abdullah Siam

214-224
- Paper 20
OPTIMIZATION OF T6 HEAT-TREATED Al₂O₃-CNT REINFORCED ALUMINIUM COMPOSITE: MICROSTRUCTURAL AND MECHANICAL PROPERTIES ANALYSIS

Mohammad Na'aim Abd Rahim, Mohd Shukor Salleh, Nur Farah Bazilah Wakhi Anuar, Saifudin Hafiz Yahaya, Salah Salman Al-Zubaidi

225-235
- Paper 21
FLEXURAL BEHAVIOUR OF HYBRID EPOXY COMPOSITES REINFORCED BY RAMIE FIBRE AND COFFEE BEAN PARTICULATE

Sarah Nadiah Nordin, Phang Hoi Tang, Wan Fahmin Faiz Wan Ali, Engku Mohammad Nazim Engku Abu Bakar, Abdul Hakim Md Yusop, Habibah Ghazali, Nor Akmal Fadil

236-249
- Paper 22
STUDY ON THE FOAMABILITY, MORPHOLOGICAL STRUCTURE AND PRESSURE-RELIEF PERFORMANCE OF AMMONIA-FREE NATURAL RUBBER LATEX FOAM FOR SHOE INSOLES APPLICATIONS

Roslim Ramli, Suhaimi Mohamed, Ruslimie Che Ali, Asrul Mustafa

250-262
- Paper 23
MORPHOLOGICAL PROPERTIES OF EPOXY COATED BAMBOO FIBERS BEFORE AND AFTER SEAWATER EXPOSURE

Rajes K.M. Rajan, Rozli Zulkifli, Mohd Faizal Mat Tahir, Albert Uchenna Ude

263-273
- Paper 24
CHARACTERIZATION OF PLA-BASED HYBRID COMPOSITES: MECHANICAL AND MORPHOLOGICAL PROPERTIES

Batrisyia Norhazlin, Mohd Adrinata Shaharuzaman, Nadlene Razali

274-285
- Paper 25
EFFECT OF PRE-HANDLING AND POST-TREATMENT CONDITIONS IN THE DEVELOPMENT OF GREEN POLYPROPYLENE COMPOSITE SLAB

Md Fauzan Kamal Mohd Yapandi, Famiza Abdul Latif, Mohammad Noor Jalil, Nurul Dhabitah Basri, Sharil Fadli Mohamad Zamri, Nabilah Akemal Muhd Zailani, Noor Najmi Bonnia

286-298
- Paper 26
ADSORPTION OF CHLORAMPHENICOL BY SAGO BARK-BASED ACTIVATED CARBON OPTIMIZED BY RESPONSE SURFACE METHODOLOGY

Siti Zawiyah Baharom, Erniza Mohd Johan Jaya, Ridzuan Zakaria, Mohd Azmier Ahmad

299-310
- Paper 27
THE EFFECTS OF DIFFERENT INFILL DENSITIES OF 3D PRINTED POLYAMIDE 12 COMPOSITE ON MC3T3-E1 ADHESION AND PROLIFERATION

Xue Zhang, Dasmawati Mohamad, Marzuki Omar, Nurul Asma Abdullah

311-319
- Paper 28

Current Reviews Article

RECENT ADVANCES IN HALAL RESEARCH VIA MICROSCOPY AND IMAGING APPROACHES: OPPORTUNITIES AND CHALLENGES

Yazid Yaakob, Nor Nadiha Mohd Zaki, Syariena Arshad, Nur Fatin Fitriah Nordin, Zahrah Atthafiya, Mohd Amiruddin Abd Rahman, Khairul Adib Yusof, Amalia Mohd Hashim

320-337
- Paper 29
METAL SURFACE TREATMENTS AND THEIR EFFECT ON METAL-CERAMIC BOND STRENGTH: A REVIEW

Mohammed Mahdi Salih Al-Mashhadani, Raja Azman Raja Awang, Noor Huda Ismail

338-349
- Paper 30

View All Issues

Malaysian Journal of Microscopy publish articles related to material and biological sciences. MJM is a double blind peer review journal and publish articles related to the following disciplines:

Medicine: Medicine (miscellaneous)
Immunology and Microbiology: Immunology and Microbiology (miscellaneous)
Materials Science: Materials Science (miscellaneous)
Engineering: Engineering (miscellaneous)
Chemistry: Chemistry (miscellaneous)
Agricultural and Biological Sciences: Agricultural and Biological Sciences (miscellaneous)
Biochemistry, Genetics and Molecular Biology: Biochemistry, Genetics and Molecular Biology (miscellaneous)

ISSN: 1823 7010
eISSN: 2600 7444

Publisher: Universiti Putra Malaysia

Publisher contact: Penerbit Universiti Putra Malaysia, 43400 UPM, Serdang Selangor. E-mail: admin@malaysianjournalofmicroscopy.org

Publisher website: Please visit Universiti Putra Malaysia, official website for more information

Editor-in-Chief:

Assoc. Prof. Ts. Dr. Che Nor Aiza Jaafar
Department of Mechanical and Manufacturing,
Faculty of Engineering,
Universiti Putra Malaysia
Email : cnaiza@upm.edu.my

Visitor Number :